The Combo Meter P110 Pro is your all in one testing solution. This meter will readily read your pH, EC, TDS and temps. The meters improved software now ensures quicker readings of accurate measurements. You can easily replace the electrode should it be worn or damaged. The Combo Meter P110 Pro is ideal for measuring the EC, pH and temperature of liquid plant nutrition and water in swimming pools, Jacuzzis and ponds. The user-friendly buttons can be used to effortlessly switch between the parameters. The meter is delivered fully calibrated and includes batteries.
Calibration takes place without any deviations. EC calibration solutions are extremely sensitive to temperature. However, this does not apply to pH. You can easily replace the electrode should it be worn or damaged. This model comes in a robust case, including pH 4.01, pH 7.00 and EC 14.13 calibration solutions, allowing you to calibrate the meter at a later time.
Remove the protective cover
Gently clean the electrode with distilled water and dry it off
Press the On/off button to start the meter
Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display
Press the Temp/CAL button, to switch between Celsius and Fahrenheit
Press the PH/EC button to switch between pH and EC
Make sure the meter is in EC mode to switch between EC, TDS and PPM. Press and hold the PH/EC button for at least 5 seconds to switch parameters
Rinse the electrode with water after use and press the On/off button to turn off the meter
1x Combo Pen P160 Pro
1x Storage box
1x Calibration solution pH 7.00 25ml
1x Calibration solution pH 4.01 25ml
1x Calibration solution 14.13 25ml
1x Screwdriver for calibration
1x User manual
Range: pH: 0.1 ~ 14.0 pH / EC: 0.0 ~ 19.9 mS/cm / TDS: 0.0 ~ 19.99 PPT / PPM: 0.0 ~ 1999 PPM / Temp.: 0°C ~ 50°C (32°F ~ 122°F)
Resolution: pH: ± 0.1 pH / EC: 0.1 mS/cm / TDS: 0.01 PPT / PPM: 10 PPM / Temp.: 0.1°C (1.0ºF)
Accuracy: pH: ± 0.1 pH / EC: ± 2% F.S. / TDS: ± 2% F.S. / PPM: 10 PPM / Temp.: ±0.5°C (32°F) / Temp. compensation: 0°C - 50°C (32°F - 122°F)
PPM scale: 700 PPM
Calibration: pH: 2 point auto 4.0 - 7.0 pH / EC manual cal suitable for every EC buffer
Features: Battery indicator & automatic temp. compensation
Power supply: 3 × 1.5 Volt AG-13 button cell battery (included)
Auto. power-off: After 8 minutes
Calibration indicator: With correct calibration
Waterproof: IP67
Dimensions: 8.66" x 1.6" x 1.6"
Weight: 0.22 lbs