130 Pints/day – Industrial-level humidity control
310 CFM @ 0.0” – Powerful circulation helps remove moisture from the air efficiently
Energy Efficient – Removes up to 2.8 liters per kilowatt hour, helping keep your operation efficient
No-Hassle Drainage – The positive pressure drain removes the need for a drain trap. Just proper drainage, with no monitoring required
Easy Filters – The self-sealing air filter protects the unit’s vital components, plus it’s easy to replace
Flexible Installation – The pre-installed electrical plug is simple to remove for hard-wired applications. Plus, options for suspended, freestanding, or ducted installation
Safety Checks – Terminals on the dehumidifier make it easy to install a float switch to protect against overflows
1-2-3 for VPD – The unit constantly monitors humidity and temperature, making it simple to reach the optimal Vapor Pressure Deficit for maximum growth
Built to Last – Designed and Manufactured in U.S.A. Dependability is at the heart of what we do. That’s why we offer a 5-year warranty on this product–so you can grow with confidence
Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.
Control(3): Built-in digital control with display
Control mounting option: Field interchangeable from top to front
Cabinet insulation: 1/2" EPS
Air discharge orientation: Top or end
Inlet/Outlet duct collars: 10" dia.
Backdraft damper at outlet: Included
Filter Washable: MERV 8
Refrigerant: R410A
Coil type: E-coated
Power cord length: 8 ft.
Discharge air temperature rise 10°F-30°F
Drain connection(4) 3/4" MNPT Threaded
Warranty: 5 years
(3)Built-in automatic control capable to be set up for dehumidification and ventilation or zoning. (4)Threaded barbed fitting included.
Drain fitting: 3/4" MPT x 3/4" barbed
10' drain tubing: 3/4" ID
Duct collars: 10" round (A130 only)
Manual: Installation instructions
Capacity: 130 ppd
Energy factor: 2.9L/kW-h
Airflow @ varying E.S.P. (external static pressure - dry coil): 0.0" w.c. - 310 CFM, 0.2" w.c. - 267 CFM, 0.4" w.c. - 226 CFM, 0.5. w.c. - 178 CFM
Voltage, phase, frequency: 120VAC, 1 phase, 60Hz
Current draw(1): 8.3 Amps
Noise: 50 dBA
Inlet air operating conditions during: Dehumidification: 50°F-104°F, 40°F dew point min. - Ventilation: 40°F-140°F, 0%-99%RH (non-condensing)
(1)Rated capacity and energy factor test done and current draw measured in accordance with AHAM DH-1 2008 at 80°F/60% Rh inlet air at 0.0 ESP. (2)Height does not include adjustable feet.The width excludes the filter doors and length excludes the duct collars.